Products

This heavy duty 100L reservoir is ideal for gravity feed or pumped irrigation systems such as the AutoPot kits. It can also be used as a secondary source of solution for DualFlow and gully systems. The water butt stand is included with the system. With it's minimal footprint this is a great space saver in your grow room or tent.

Blumat 8mm Connectors come in handy when building a customized automatic watering system with Blumat Tropf Sensors / “carrots” and other Blumat accessories. They connect to the Blumat Tropf 8mm Tubing water supply line.

• The 8mm T-Piece splits the supply line in two.
• The 8mm to 3mm Elbow is used at the end of each line and attaches the last Blumat Tropf Sensor in the line to the 8mm supply line.
  

Tropf-Blumat is an automatic watering system. This water-saving drip irrigation  system works without electricity and without an app and is controlled by  the porous clay cones. You don’t even need a permanent water supply to  water plants automatically. Indoors, the best watering options are the Blumat Classic or the Blumat Easy bottle adapter.

Blumat watering systems are ideal for indoor plants, balcony plants and potted plants. The plant  watering system is a reliable, efficient and economical way of watering  flowering plants and vegetables on the balcony and patio, in raised  beds and greenhouses. Blumat is ideal for watering plants when you are on holiday and works all year round.

Tropf-Blumat is an automatic watering system for plants all around the house. From flowering plants to your own vegetables, Tropf-Blumat is a needs-based system - watering only occurs when necessary.

Needs-based & economical With Tropf-Blumat, every single plant is individually watered. That’s good news for the plants and also reduces water consumption. More flowers, more fruits, you will notice the difference.

Convenient Tropf-Blumat reliably takes care of the daily watering for you. You can also go on holiday with an easy mind at any time as Tropf-Blumat works all year round.

Advantages

Simple & flexible Tropf-Blumat consists of just a few components and can be installed without any tools. You can change your system at any time and extend it to up to 500 watering points.

Smart without electricity Tropf-Blumat works completely without electricity or water computer.

No mains connection

No changing of batteries

No complex programming

The clay cone thinks for you.

Natural watering

The water is released slowly and in doses. Consequently, plants always receive tempered water and healthy and lush growth is the result.

The water tank should be at least 0.5 m higher than the Blumat Tropf system for every 5 m of tube but no more than 14 metres higher.

Included in the pack :

2 x Blumat 8mm T- Pieces

2 x Blumat 8mm to 3mm Elbows

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for Tropf-Blumat systems can be downloaded here.

Some great YouTube videos :

 Tropf Blumat Installation

About the Tropf Blumat System

A 72 plant Aeroponic compact vertical tower which is perfect for home and family growing, self sustenance and small scale growing enthusiasts, with built in plug and grow irrigation system. This system is also ideal for aeroponic cloning of cuttings.

The 72 plant Aeroponic Vertical Tower includes:

36 x Modular panels(72 plants)

1 x 25 Liter base tank

1 x Top cap

72 x Growing baskets

72 x Plant clamps

72 x Clone sponges

1 x Aeroponic Irrigation system

1 x Aluminium Rotary Base frame

1 x Nutrient Pack = 40 Liters

Manufactured in South Africa with backup support

The Autopot 12Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The Autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated, Autopot system allows gardeners to relaxand even go away on holiday and still be assured of healthy plants and bumper harvests.

Autopot 12Pot System AQUAValve5 with 15L Pots includes:

1 x 12mm Click-fit tank adaptor & filter

1 x 8 meter Length of 12mm pipe

2 x 12mm In-line tap

4 x 12mm In-line tap adaptor

1 x 12mm Tee Piece

2 x 12mm Elbow

12 x 1 Pot Trays & lids

12 x 15ltr Pots

12 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 12 Marix, 12 Root control disks, 12 x 1 Meters of 9mm Autopot piping, 4 Cross Connector 12mm to 9mm & 4 T Connector 12mm to 9mm)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Instructions

An Autopot 1Pot Extension Unit AQUAValve5 is used when you already have an Autopot system and would like to add another unit to it, or when installing a new customized system.

AQUAValve5 for systems using 9mm and 12-9mm fittings.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

The Autopot 1Pot Extension Unit AQUAValve5 is extremely versatile and can be used for a wide range of plant varieties and sizes. The unit is easily extended so many pots can be linked to a single tank.

The 15 liter pot that is supplied with the 1 Pot module enables you to grow large specimen plants.

The pot and the tray can be easily  moved if the  plant grow too large  and need to be  spaced further apart.

The 15 liter pots used in the 1 Pot module and the 8.5 liter pots used in the 2 Pot Unit system are interchangeable and can be used  in either tray design.

Ensure all trays are level when in position.

The Autopot 1Pot Extension Unit AQUAValve5 includes:

1x Tray & lid

1x 15ltr Pot

1x AQUAvalve 5

1x 1 meter of 9mm Pipe

1x Marix Disc (SQUARE) 186mm x 186mm (BLACK)

1x Root Control Disc (SQUARE) 196mm x 196mm (BLACK & GOLD)

1x 9mm Tee for easy connection to existing systems.

1x 12-9mm T Connector

1x 12-9mm Cross Connector

Reservoir and growing medium not included

Autopot 1Pot Extension Unit AQUAValve5 Instructions

The Autopot 4 Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

Autopot 4 Pot System AQUAValve5 with 15L Pots includes:

1x 47ltr tank, lid & 9mm top hat grommet
1x 9mm golf filter
4x 9mm tee
2x 9mm cross connector
2x 9mm inline taps
4x 1Pot tray, lid & 9mm top hat grommet
4x 15 litre pots
4x AQUAvalves
4x root control discs
4x marix discs
1x 4 metre length of 9mm pipe

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autopot Instructions

The Autopot 47L Water Tank is a solid water tank of high quality and is a cost effective water storage solution. The sturdy and reliable Autopot 47L Water Tank are ideal for gardeners who have smaller systems or gardeners who are able to grow free from the need for more portable, pack-away equipment.

Please Note: All Autopot 47L Water Tanks now have a pre-drilled 12.5mm supply line hole, for use with the new Autopot Aquavalve 5.

It is important that you select the correct size of water tank for the system you have. Doing so ensures your plants are properly watered during the extended periods in which an AutoPot System may be left unattended.

Tank dimensions: 615mm (H) x 375mm (W – at lid) x 300mm (W – at base)

It is recommended to raise your tank to a minimum of 150mm above the highest AQUAvalve, although having the tank at the same height as the valves is also fine for smaller systems (with only a couple of pot sets in the system).

The 47 Litre Tank has sufficient capacity to irrigate (roughly) the following AutoPot Watering Systems:

1 Pot sets – up to 6 x 1 Pot sets

Easy2grow (2 Pot Sets) – up to 4 x Easy2grow sets

1 Pot XL / SmartPot XL – up to 4 x Pot XL / SmartPot XL sets

The Autopot 6 Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

Autopot 6Pot System AQUAValve5 with 15L Pots includes:

1 x 47 ltr Tank, lid & 9mm Top hat grommet

1 x 9mm In-line filter

2 x 9mm In-line tap

3 x 9mm Cross connector

6 x 1Pot trays & lids

6 x 15ltr Pots

6 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 6 Marix, 6 Root control disks & 6 x 1 Meters of 9mm Autopot piping.)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autopot Instructions

The Autopot 6 Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

Autopot 6Pot System AQUAValve5 with 15L Pots includes:

1 x 9mm In-line filter

2 x 9mm In-line tap

3 x 9mm Cross connector

6 x 1Pot trays & lids

6 x 15ltr Pots

6 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 6 Marix, 6 Root control disks & 6 x 1 Meters of 9mm Autopot piping.)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Instructions

The Autopot 9Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

Autopot 9Pot System AQUAValve5 with 15L Pots includes:

1 x 100lt Flexitank

1 x 12mm Click-fit tank adaptor & filter

1 x 6 meter Length of 12mm pipe

2 x 12mm In-line tap

4 x 12mm In-line tap adaptor

1 x 12mm Tee Piece

2 x 12mm Elbow

9 x 1Pot trays & lids

9 x 15ltr Pots

9 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 9 Marix, 9 Root control disks & 9 x 1 Meters of 9mm Autopot piping, 3 Cross Connector 12mm to 9mm & 3 T Connector 12mm to 9mm )

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autopot Instructions

The Autopot 9Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

Autopot 9Pot System AQUAValve5 with 15L Pots includes:

1 x 12mm Click-fit tank adaptor & filter

1 x 6 meter Length of 12mm pipe

2 x 12mm In-line tap

4 x 12mm In-line tap adaptor

1 x 12mm Tee Piece

2 x 12mm Elbow

9 x 1Pot trays & lids

9 x 15ltr Pots

9 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 9 Marix, 9 Root control disks & 9 x 1 Meters of 9mm Autopot piping, 3 Cross Connector 12mm to 9mm & 3 T Connector 12mm to 9mm )

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Instructions

The Auto8 AQUAValve5: Grow what you want, when you want, enjoying the incredible space and maintenance saving benefits of a tray system. The Auto8 comes complete with eight 15ltr square pots.

AQUAValve5 – a 66% Bigger Inlet

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimize repotting and the risk of transplant shock.

The principles of the Auto9XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.

Cultivating with Auto8 benefits growers in three key areas:

Growing Space

• Maximizes the available area
• Ideal for moveable racks and rolling tables

Overheads

• Draws no more water than 8 single 1Pot trays
• Reduction in components = reduced maintenance costs and duties

Plant Health

• Unlike a large, single, flat tray the molded base minimizes standing water
• Lid blocks light and debris from entering the tray

Autopot Auto8 AQUAValve5 includes:

• 8 plastic Autopot Pots (15l)
• 1x Auto8 tray, lid & access cover
• 1x AQUAvalve  5
• 1x AQUAvalve cover
• 1x 9mm top hat grommet
• 1m length of 9mm piping
• 8x PotSock Square
  
• 8x Matrix Disc (Square)

Minimum Reservoir Requirements

• 1x system – FlexiTank / FlexiTank Pro 100ltr
• 2x systems – FlexiTank / FlexiTank Pro 225ltr
• 4x systems – FlexiTank / FlexiTank Pro 400ltr
• 8x systems – FlexiTank 750ltr
• 10x systems – FlexiTank 1000ltr

This system does not include a tank. You will need to purchase a FlexiTank which is available for sale separately.

Autopot Auto8 Instructions

The Auto8 AQUAValve5: Grow what you want, when you want, enjoying the incredible space and maintenance saving benefits of a tray system. The Auto8 comes complete with eight 8.5ltr square pots.

AQUAValve5 – a 66% Bigger Inlet

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

You can cultivate plants at various stages of development in the same tray system. Swap plants in and out with ease as needed. Minimize repotting and the risk of transplant shock.

The principles of the Auto9XL also apply to Auto8. Multiple pots are irrigated in a single tray and lid assembly by a single AQUAvalve. Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.

Cultivating with Auto8 benefits growers in three key areas:

Growing Space

• Maximizes the available area
• Ideal for moveable racks and rolling tables

Overheads

• Draws no more water than 8 single 1Pot trays
• Reduction in components = reduced maintenance costs and duties

Plant Health

• Unlike a large, single, flat tray the molded base minimizes standing water
• Lid blocks light and debris from entering the tray

Autopot Auto8 AQUAValve5 includes:

• 8 plastic Autopot Pots (8.5l)
• 1x Auto8 tray, lid & access cover
• 1x AQUAvalve  5
• 1x AQUAvalve cover
• 1x 9mm top hat grommet
• 1m length of 9mm piping
• 8x PotSock Square
  
• 8x Matrix Disc (Square)

Minimum Reservoir Requirements

• 1x system – FlexiTank / FlexiTank Pro 100ltr
• 2x systems – FlexiTank / FlexiTank Pro 225ltr
• 4x systems – FlexiTank / FlexiTank Pro 400ltr
• 8x systems – FlexiTank 750ltr
• 10x systems – FlexiTank 1000ltr

This system does not include a tank. You will need to purchase a FlexiTank which is available for sale separately.

Autopot Auto8 Instructions

The Autopot Auto9 AQUAValve5: Maximize your growing space with Autopot’s Tray Systems. These innovative and efficient irrigation solutions were developed with Autopot’s commercial partners and are now available to the public. The development partners wanted to pull as much profit per square meter as possible. Tray systems allow you to achieve this with the capacity to irrigate multiple pots in single tray and lid assembly, all fed by a single AQUAvalve 5.

Aquavalve 5 – a 66% Bigger Inlet

PLEASE NOTE: The system has the new 20lt Flexipots (which are different to the images). These are similar to the Smartpots (in the images), and have blue stitching and have handles stitched on as well.

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

Autopot Tray Systems run on exactly the same valve-driven technology as other Autopot systems. You are still growing power-free, with not a drop of water wasted. But Tray Systems can cut your overheads further. The reduction in components as opposed to multiple individual pots and trays (each with their own valve and line) means a fraction of the maintenance duties.

For commercial growers amalgamating the pots in a single tray promises to change everything. When growing plants on shelving that can be double or triple height, reducing maintenance duties is key. It’s challenging to tend to your plants and irrigation system when they are placed three or six meters above ground level! With Tray Systems you can take advantage of the vertical space you have without the concern of having to access a vast number of individual pots and trays. Not only are Tray Systems simple to install and operate, they irrigate with zero run-off so don’t require any plumbing for waste water.

The Auto 9 XL SmartPot sets allow you to irrigate 9 pots in single tray and lid assembly measuring just over a square meter. All pots are fed by a single line to a single valve.

Benefits growers in three key areas:

Maximizes the available area

Ideal for movable racks and rolling tables

Tray Dimensions: 115cm x 105cm

Draws no more water than 9 single XL trays

Reduction in components = reduced maintenance duties and costs

Plant Health

Unlike a large, single, flat tray the molded base minimizes standing water

Lid blocks light and debris from entering the tray

Minimum Reservoir Requirements

1x System – FlexiTank / FlexiTank Pro 100ltr

2x System – FlexiTank / FlexiTank Pro 225ltr

4x System – FlexiTank / FlexiTank Pro 400ltr

8x System – FlexiTank 750ltr

10x System – FlexiTank 1000ltr

The Autopot Auto9 AQUAValve5 sets include:

20lt SmartPot set:

• 1x Auto 9 XL tray, lid & access cover
• 1x AQUAvalve 5
• 1x AQUAvalve cover
• 1x 9mm top hat grommet
• 1m length of 9mm piping
• 9x 20ltr fabric SmartPots
• 9x PotSock Round

This system does not include a tank. You will need to purchase a FlexiTank which is available for sale separately.

Autopot Auto9 Instructions

The Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots includes:

1 x 100 ltr FlexiTank

1 x 12mm Click-fit tank adaptor & filter

1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings

1 x 3 metres 12mm Pipe

6 x 2 Pot tray & lid ( Black )

12 x 8.5L Pots ( Black )

6 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 12 Marix Disks, 12 Square potsocks, 3 x 12mm – 9mm Cross connectors & 6 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autopot Easy2grow 12 Pot Instructions

The Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots includes:

1 x 12mm Click-fit tank adaptor & filter

1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings

1 x 3 metres 12mm Pipe

6 x 2 Pot tray & lid ( Black )

12 x 8.5L Pots ( Black )

6 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 12 Marix Disks, 12 Square potsocks, 3 x 12mm – 9mm Cross connectors & 6 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Easy2grow 12 Pot Instructions

The Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots includes:

1 x 225 ltr FlexiTank

1 x 12mm Click-fit tank adaptor & filter

1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings

1 x 6 meters 12mm Pipe

10 x 2 Pot tray & lid ( Black )

20 x 8.5L Pots ( Black )

10 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 20 Marix Disks, 20 Square Potsocks, 5 x 12mm – 9mm Cross connectors & 10 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autopot Easy2grow 20 Pot Instructions

The Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots includes:

1 x 12mm Click-fit tank adaptor & filter

1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings

1 x 6 meters 12mm Pipe

10 x 2 Pot tray & lid ( Black )

20 x 8.5L Pots ( Black )

10 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 20 Marix Disks, 20 Square Potsocks, 5 x 12mm – 9mm Cross connectors & 10 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Easy2grow 20 Pot Instructions

The Autopot Easy2grow 6 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops such as herbs, strawberries, tomatoes to name a few. The Autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

A wide range of growing substrates can be used with the Easy2grow (2 Pot) system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 6 System AQUAValve5 with 8.5L Pots includes:

3 x 2 Pot tray and lid

6 x 8.5L Pots

3 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE5. (Incl. 6 Marix, 6 Root control disks, 3 x 9mm T-Pieces & 3 x 1 meters of 9mm Autopot piping)

2 x 9mm In-line tap

1 x 9mm Filter

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autopot Easy2grow Instructions

An Autopot Easy2Grow Extension Unit AQUAValve5 is used when you already have an Autopot system and would like to add another unit to your existing  Autopot system.

AQUAValve5 for systems using 9mm and 12-9mm fittings.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

The Easy2Grow Extension Unit AQUAValve5 is the preferred system used by commercial growers throughout the world. It offers maintenance free growing optimum growth without wasting a single drop of water.

The Autopot system will water and feed your plants using 8.5 liter pots without the need for pumps, timers and electricity.

Whether using the 2 Pot Unit starter kit or multiple easy2grow extension kits on a vast commercial scale, this system provides everything the plant requires.

The Autopot Easy2Grow Extension Unit AQUAValve5 includes:

1x 2Pot tray & lid

2x 8.5ltr pots

2x Marix discs – the Marix discs are placed inside each of the pots to prevent soil/compost from leaving the pots

2x Square Potsocks – put over the base of each pot, gold face up. The Potsocks will prevent roots from growing through the pots and eventually into the AQUAvalve.

1x AQUAvalve 5, placed in between the pots inside of the tray.

1x 1 meter of 9mm Autopot piping.

1x 9mm T Connector, 1x 12-9mm T Connector & 1x 12-9mm Cross Connector – for easy connection to existing systems.

Reservoir and growing medium not included

PLEASE NOTE: New Autopot sets are all black in colour.

Autopot Easy2Grow Extension Kit Instructions

The Autopot SmartPot 2 System AQUAValve5 combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – deterred from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned between uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

An Autopot SmartPot 2 System AQUAValve5 contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSocks included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

Autopot Smartpot XL fabric pot size is 18.9L

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Autopot SmartPot 2 System AQUAValve5 includes:

1 x 9mm Filter

1 x 9mm Cross connector

2 x 1Pot XL Trays & lids

2 x 18.9ltr SmartPot

2 x 9mm inline tap

2 x Autopot XL Smartpot Accessory Pack with AQUAVALVE 5 (Incl. 2 Round Potsocks, 2 x 1 meters of 9mm Autopot piping)

This system does not include a tank. You will need to use your own tank with the system.

Autopot SmartPot 2 Instructions

The Autopot SmartPot 2 System AQUAValve5 combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – deterred from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned between uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

An Autopot SmartPot 2 System AQUAValve5 contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSocks included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

Autopot Smartpot XL fabric pot size is 18.9L

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Autopot SmartPot 2 System AQUAValve5 includes:

1 x 47ltr Tank, lid & 9mm Top hat grommet

1 x 9mm Filter

1 x 9mm Cross connector

2 x 1Pot XL Trays & lids

2 x 18.9ltr SmartPot

2 x 9mm inline tap

2 x Autopot XL Smartpot Accessory Pack with AQUAVALVE 5 (Incl. 2 Round Potsocks, 2 x 1 meters of 9mm Autopot piping)

Autopot SmartPot 2 Instructions

The Autopot SmartPot 6 System AQUAValve5 combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – deterred from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned between uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

An Autopot SmartPot 6 System AQUAValve5 contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSock included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

Autopot SmartPot 6 System AQUAValve5 includes:

1 x 100 ltr FlexiTank

1 x 12mm Click-fit tank adaptor & filter

1 x 3 meter Length of 12mm pipe

1 x 12mm In-line tap

2 x 12mm In-line tap adaptor

6 x 1Pot XL trays & lids

6 x 18.9ltr SmartPot

6 x Autopot XL Smartpot Accessory Pack with AQUAVALVE 5 (Incl. 6 Round Potsocks, 6 x 1 meters of 9mm Autopot piping and 3 x 12mm-9m Cross connectors)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

Autpot SmartPot 6 Instructions

The Autopot SmartPot 6 System AQUAValve5 combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. SmartPots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The porous BPA-free, lead-free SmartPot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a SmartPot they are ‘air-pruned’ – deterred from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the SmartPots are easily cleaned between uses if desired. Once emptied the SmartPots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the SmartPot may be machine or tub washed in peroxide in order to sterilize. Do not put SmartPots in a tumble dryer.

An Autopot SmartPot 6 System AQUAValve5 contains all you need to set up an automated watering system with fabric pots. The compact size and portability that SmartPot brings to XL means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the SmartPot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a PotSock Round (PotSock included) be fitted to the base of each SmartPot to provide root control.

Please note: Room humidity may be increased when growing with multiple SmartPots indoors due to the exposed, porous surface of the fabric pots.

Autopot SmartPot 6 System AQUAValve5 includes:

1 x 12mm Click-fit tank adaptor & filter

1 x 3 meter Length of 12mm pipe

1 x 12mm In-line tap

2 x 12mm In-line tap adaptor

6 x 1Pot XL trays & lids

6 x 18.9ltr SmartPot

6 x Autopot XL Smartpot Accessory Pack with AQUAVALVE 5 (Incl. 6 Round Potsocks, 6 x 1 meters of 9mm Autopot piping and 3 x 12mm-9m Cross connectors)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice.

This system does not include a tank. You will need to use your own tank with the system.

Autpot SmartPot 6 Instructions