Products

The LUMii BLACK Lamp is a 600 W Dual Spectrum, High Pressure Sodium (HPS) Lamp with an E40 fitting. Perfect for stimulating enhanced flowering, offers 18,000 life hours and 90,000 Lumens. For best results, we recommend using them with a LUMii BLACK Ballast.

The LUMii Sunblaster Dual Spectrum HPS offers exceptionally high output – Couple this with raised spectral discharge in the reds and blues and a long lamp life, and you have the perfect plant grow light.

PowerPlant lamps are tailored to promote optimum development at each stage of plant growth. The PowerPlant arc tube dosing technology achieves more usable light energy without sacrificing intensity or lamp life. The output of Metal Halide is firmly in the blue spectrum, Metal Halide Lamps are used almost exclusively for aiding superior vegetative growth. Suited to a two-lamp method, these will produce amazing returns when you have a Sodium Lamp taking care of the flowering stage.

EnviroGro's T5 System delivers performance and flexibilty along with high lumen output in any growing environment. This system contains 2 T5 lamps.

These systems allow you to choose multiple hanging configurations to meet your garden's design. The EnviroGro T5 System hangs three ways - overhead, vertically or horizontally. 

Gavita Master Controller EL2 Gen2

Lighting control at your fingertips! The Master controller EL1 and EL2 Gen2 are our entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar:

- Non-volatile memory
- Event logging
- Independent sunrise and sunset settings
- Independent light cycles on the EL2

Switch, dim and boost centrally

Now you have complete control over the light cycle and the output of your fixtures from one single point. Never reach to a ballast again!

Simple programming

Setting up the controller is a breeze, with a 5 language text interface in plain language on a high quality OLED display.

Independent light cycles on EL2 models

Allowing to program two different, and overlapping cycles, for example, a 12/12 on channel 1 and an 18/6 on channel 2.

Logging

The logging functionality provides insight in the current and past status of your lights and alarms.
Logging functions for high/low temperature, last autodim event, last shutdown event and last power loss.

Separate sunrise/sunset

Set different times for sunrise and sunset.

Crop safety - autodim

In extreme conditions the Master Controller automatically dims your lights, so your plants will survive the high heat.

Memory

Nonvolatile memory to store user settings.

Easy installation

The complete installation is plug-and-play. Every e-series fixture comes with all necessary cables to install it on the e-series control bus.

Crop protection – auto-shutdown

When cooling or ventilation fails, the Master Controller automatically switches off your lights, preventing imminent damage to your crop (or worse).

Independent programmable ECMs (External Contactor Modules)

The ECMs (External Contactor Modules) are used to switch on or off auxiliary equipment during the lights-on or lights-off period. In the GEN2 EL2 controllers you can now choose whether they switch on or off, and which channel they should follow. This allows for flexible integration and automation.

Download the Manual

Gavita Pro 1000e Double Ended Flex Complete Fixture

The ‘e’ in ‘e-series’ stands for external control. These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita improved the electronics and changed the way the ballast is built, by mounting the PCB and warm components directly on the heat sinks instead of in a ballast bracket. The much cooler electronics result in a greater reliability and a longer life. The new design of the housing even increases that effect.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

400V lamp technology for high frequency electronic ballast

The high voltage lamp technology results in a better efficiency of the arc tube: more light for the same power (10-25% more than traditional single ended lamps)! These lamps are best suited for extreme high frequency electronic ballasts, creating a stable arc without acoustic resonance, assuring optimal output and a long lamp life. The smaller arc tube and outer balloon require the lamp to be nitrogen filled instead of vacuum, which prohibits it to be air cooled. Air cooling of the lamp results in lower lamp temperature, which results in sub-optimal light output, up to 15% less than specified. Therefore these lamps are not suitable for direct air cooled fixtures.

More Information

The fixture comprises of a ballast, reflector and lamp in one complete compact package. Made according to horticultural standards, the housing of the ballast is sealed and contains a gore-tex® plug to ventilate the housing, while keeping dust and humidity out.
Ballast output is either controlled by the Gavita Master controllers, or an external switch, allowing it to be adjusted to 600, 750, 825, 1000 W, and 1150W boosted output. The Master Controller can centrally control the output hundreds of fixtures in a range between 500 and 1150W output power. Using the Master controller safeguards your valuable crop by the added auto-dim and auto-shutdown features, and completely automates your light control.

The compact complete fixture contains a lamp, HR96 reflector and horticultural quality ballast in one comprehensive package. The higher output and added efficiency of the industry standard HR96 reflector make this the workhorse of the family.
The reflector is replaceable (we recommend to do this every year to two years) and there is a choice of replacement reflectors:

• The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. This is the industry standard reflector delivered with the fixture.
• The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 150 degrees beam angle, for double ended lamps.
• The M 110 DE SR for applications in single rows and small rooms, where a single reflector needs to create uniformity and high light levels. 110 degrees beam angle, for double ended lamps.

The spread of the Pro 1000 equipped with the HR96 DE reflector is about 4×6 ft (110x180cm) at 3 ft distance in overlapping plans, providing light levels of up to 1000 µmol s-1 m-2. The reflector is replaceable (we recommend to do this every year to two years).
The fixture’s light source is a Gavita Pro Plus 1000W double ended HPS lamp, generating 2100 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year.

Mounting is easy because the fixture is balanced and only requires two hanging points. 

Download the Spec Sheet

Download the Manual

Gavita Pro 6/750e Double Ended Flex Complete Fixture

The ‘e’ in ‘e-series’ stands for external control. These fixtures can be controlled centrally by a Gavita Master controller. This replaces the often cumbersome installation with contactors and clocks, and adds safety features such as automatic dimming of your lights at high temperatures and even a safety shutdown. Gavita were the first to launch a double ended 1000W HPS lamp in this market, and were also the first to introduce a double ended 750W HPS lamp. This lamp bridges the gap between a 600W single ended, and a 1000W double ended fixture.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

400V lamp technology for high frequency electronic ballast

The high voltage lamp technology results in a better efficiency of the arc tube: more light for the same power (10-25% more than traditional single ended lamps)! These lamps are best suited for extreme high frequency electronic ballasts, creating a stable arc without acoustic resonance, assuring optimal output and a long lamp life. The smaller arc tube and outer balloon require the lamp to be nitrogen filled instead of vacuum, which prohibits it to be air cooled. Air cooling of the lamp results in lower lamp temperature, which results in sub-optimal light output, up to 15% less than specified. Therefore these lamps are not suitable for direct air cooled fixtures.

More Information

In many rooms you just don’t have the height to run a 1000W fixture at 100%, and in other rooms you don’t need the intensity. Running a 1000W lamp at 750W all the time is a not a desirable situation as the lamp does not come to its full efficiency and the spectrum deteriorates. In those situations the 6/750 DE FLEX is the ideal solution, more efficient, cheaper and with a much better spectrum. We call it the 6//750 as the efficiency of the lamp, dimmed to 600W, is still really good: as good as any other 600W industry standard HPS lamp.
With the 750W lamp you can come almost a ft closer to your crop (a bit less in overlapping plans).

The fixture comprises of a ballast, reflector and lamp in one complete compact package. Made according to horticultural standards, the housing of the ballast is sealed and contains a gore-tex® plug to ventilate the housing, while keeping dust and humidity out.

Ballast output is either controlled by the Gavita Master controllers, or an external switch, allowing it to be adjusted to 400, 500, 600, 750 W, and 825 W boosted output. The Master Controller can centrally control the output hundreds of fixtures in a range between 375 and 825 W output power. Using the Master controller safeguards your valuable crop by the added auto-dim and auto-shutdown features, and completely automates your light control.
The high frequency ballast was specifically designed for the Gavita double ended HPS lamp, resulting in an accurate, optimal output, a stable burning lamp and a better light maintenance over time. The ballast is not suitable to run Metal Halide lamps.

The reflector is replaceable (we recommend to do this every year to two years) and there is a choice of replacement reflectors:

• The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. This is the industry standard reflector delivered with the fixture.
• The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 150 degrees beam angle, for double ended lamps.
• The M 110 DE SR for applications in single rows and small rooms, where a single reflector needs to create uniformity and high light levels. 110 degrees beam angle, for double ended lamps.

The spread of the Pro 6//750 with the HR96 DE reflector is about 3×4.5 ft (90×135 cm) at 2.5 ft distance in overlapping plans, providing light levels of up to 1000 µmol s-1 m-2.
The fixture’s light source is a Gavita Pro 750W double ended HPS lamp, generating 1450 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year.
Mounting is easy because the fixture is balanced and only requires two hanging points.

Download the Spec Sheet

Download the Manual

Designed for high voltage, high frequency fixtures

Pro lamps are specifically designed for high voltage, high frequency fixtures such as our Pro line fixtures.

Made in Europe, these Gavita lamps are the professional choice for growers who require the optimal light output and longest light maintenance on the market. 

Remember to change your lamps once every year for optimal light output.

Designed for high voltage, high frequency fixtures

Pro lamps are specifically designed for high voltage, high frequency fixtures such as our Pro line fixtures.

Made in Europe, these Gavita lamps are the professional choice for growers who require the optimal light output and longest light maintenance on the market. 

Remember to change your lamps once every year for optimal light output.

Lush, full-spectrum lighting meets spectacular efficiency with the GIB Lighting 630 W LED.  With a PAR output to beat most 1000w HID lamps, these LEDs are the future of indoor growing.  Make long-term cost savings on your grow by using less electricity - and get better results from your grow!

Unlike traditional HID lamps, which can cause grow room temperatures to rise dangerously, LED lights create little heat. This makes it easier for you to manage your environment, especially in the summer.

• PPF of 1575umol/s
• Full spectrum, white light with elevated blues and reds
• Perfect for vegetative growth and bloom stages – no need to change lamps
• Ideal for heat management – much cooler than traditional HID lighting
• No need for a ballast – just plug in and play!

Technical Specifications:

The LUMii AeroTube is the latest inline air-cooled reflector. This innovative product, when used in conjunction with ducting and fans, allows air to flow through the reflector, thus helping to control the environment temperature.

The LUMii AeroTube is 150mm and features a removable lamp holder along with a 2-part external reflector and a 4m cable.

Multiple shades can be mounted in series, with the use of 150mm Flexible Aluminium Ducting. We recommend up to 2 inline.

Temperature control

Toughened glass

Removable lamp holder for easy lamp access and cleaning

External 2-part reflector for superior light output and spread

Mount multiple shades in series (recommended maximum of 2 per fan)

4m IEC lead included

Recommended Wattage

150mm – Up to 600w

The LUMii BLACK Complete Kit comes with a LUMii BLACK Reflector, LUMii Electronic Ballast and LUMii 600W HPS Lamp.

REFLECTOR

The reflector boasts dimpled wings for excellent reflectivity, light dispersion and the reduction of hot-spots. It includes 2 convenient tabs on the top for easy hanging as well as a 5m IEC cord. The LUMii BLACK Reflector is designed for use with any horizontally mounted HPS or MH lamp up to and including 600W. It is not suitable for use with 1000W HID lamps. We recommend using a LUMii BLACK 600w HPS or LUMii SunBlaster Lamp for best results. Dimensions: Length – 510mm, Width – 380mm, Depth – 130mm

BALLAST

This 600 W Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output. For best results, always use the correct lamp per wattage setting. 

LAMP

The LUMii BLACK Lamp is a 600 W Dual Spectrum, High Pressure Sodium (HPS) Lamp with an E40 fitting. Perfect for stimulating enhanced flowering, offers 18,000 life hours and 90,000 Lumens. For best results, we recommend using them with a LUMii BLACK Ballast.

PLEASE NOTE KIT DOES NOT INCLUDE ROPE RATCHETS WHICH NEED TO BE PURCHASED SEPARATELY.

The LUMii BLACK Complete Kit comes with a LUMii BLACK Reflector, LUMii Magnetic Ballast and LUMii 600W HPS Lamp.

REFLECTOR

The reflector boasts dimpled wings for excellent reflectivity, light dispersion and the reduction of hot-spots. It includes 2 convenient tabs on the top for easy hanging as well as a 5m IEC cord. The LUMii BLACK Reflector is designed for use with any horizontally mounted HPS or MH lamp up to and including 600W. It is not suitable for use with 1000W HID lamps. We recommend using a LUMii BLACK 600w HPS or LUMii SunBlaster Lamp for best results. Dimensions: Length – 510mm, Width – 380mm, Depth – 130mm

BALLAST

The LUMii BLACK Metal Magnetic Ballast is a 600w metal-cased magnetic ballast, supplied with a flying IEC lead, this ballast enables you to add any reflector fitted with a universal IEC socket. It’s simple to start growing, just add a reflector and a lamp with the same wattage as the ballast. The well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room. It has an IP rating of 20 and runs at 2.9A. The LUMii BLACK Metal-Cased Magnetic ballast can be used with any 600w HID lamp – however we recommend using a LUMii SunBlaster 600w or LUMii BLACK 600w HPS lamp to get the best results.

LAMP

The LUMii BLACK Lamp is a 600 W Dual Spectrum, High Pressure Sodium (HPS) Lamp with an E40 fitting. Perfect for stimulating enhanced flowering, offers 18,000 life hours and 90,000 Lumens. For best results, we recommend using them with a LUMii BLACK Ballast.

PLEASE NOTE BASE KIT DOES NOT INCLUDE ROPE RATCHETS WHICH NEED TO BE PURCHASED SEPARATELY.

This 600 W Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output. For best results, always use the correct lamp per wattage setting. This ballast is guaranteed for 12 months from date of manufacture providing the unit is returned to the place of purchase and subject to the unit not being modified in any way.

The LUMii BLACK Metal Magnetic Ballast is a 600w metal-cased magnetic ballast, supplied with a flying IEC lead, this ballast enables you to add any reflector fitted with a universal IEC socket. It’s simple to start growing, just add a reflector and a lamp with the same wattage as the ballast.The well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room. It has an IP rating of 20 and runs at 2.9A. The LUMii BLACK Metal-Cased Magnetic ballast can be used with any 600w HID lamp – however we recommend using a LUMii SunBlaster 600w or LUMii BLACK 600w HPS lamp to get the best results.This ballast is guaranteed for 12 months from date of manufacture providing the unit is returned to the place of purchase and subject to the unit not being modified in any way.

The LUMii BLACK reflector boasts dimpled wings for excellent reflectivity, light dispersion and the reduction of hot-spots. It includes 2 convenient tabs on the top for easy hanging as well as a 5m IEC cord. The LUMii BLACK Reflector is designed for use with any horizontally mounted HPS or MH lamp up to and including 600W. It is not suitable for use with 1000W HID lamps. We recommend using a LUMii BLACK 600w HPS or LUMii SunBlaster Lamp for best results. Dimensions: Length – 510mm, Width – 380mm, Depth – 130mm

Lumii GrowRoom Lenses are specifically designed to allow you to view your crop in a more natural light as they reduce the glare from HID and CFL grow lamps.

Perfect for suspending air-cooled and heavier lighting reflectors, the LUMii rope rachet can hold up to 65kg EACH. The large S hooks allow for easy hanging and the ratchets pull tight and lock in place securely.The LUMii heavy duty rope ratchets are not only used for larger lighting equipment, but also ideal for carbon filters and ventilation equipment.

The LUMii Rope Ratchets pull tight and lock into place. They are really durable. The LUMii Rope Ratchets are tough and will not let you down whilst they are also heat and cold resistant. Each LUMii Rope Ratchet has two quick release carabiner clips for ease of use and 2.4 metres of tough braided polypropylene rope.

LUMii SOLAR 315W Ceramic-Discharge Metal-Halide (CDM) lamps deliver a light spectrum that’s much closer to natural sunlight than typical high intensity discharge (HID) systems. These state-of-the art lamps generate a greater level of useable plant light (photosynthetically active radiation) and run with a blinding intensity that’s immediately apparent to the naked eye.

The LUMii SOLAR 315W CDM lamps boast low power consumption and heat output and they produce a very high-quality end product.

The LUMii SOLAR PRO CDM is a lamp which provides a compact and efficient metal halide answer for the horticultural market. This lamp, combined with the professional ballast, provides exceptional growth light performance over the life span of the product. This lamp is double-jacketed for added safety.

The lamp is optimised for flowering with enhanced reds, but because it’s full-spectrum, it will produce the goods in both grow stages – expect to see increased growth rates, tighter internodes and an improvement in overall vigour.

The colour temperature of 3200K makes the LUMii SOLAR PRO CDM perfect for all stages of growth from start to finish.

LUMii SOLAR 315w Ceramic-Discharge Metal-Halide (CDM) lamps deliver a light spectrum that’s much closer to natural sunlight than typical high intensity discharge (HID) systems. These state-of-the art lamps generate a greater level of useable plant light (photosynthetically active radiation) and run with a blinding intensity that’s immediately apparent to the naked eye.

The LUMii SOLAR 315W CDM lamps boast low power consumption and heat output and they produce a very high-quality end product.

The LUMii SOLAR GRO CDM is a lamp which provides a compact and efficient metal-halide answer for the horticultural market. This lamp is highly efficient and can be used as a total light source, or as supplemental lighting alongside HID lights.

This ‘daylight’ lamp is specifically optimised for vigorous vegetative growth and is double-jacketed for added safety.

The colour temperature of 4200K makes the LUMii SOLAR GRO CDM lamp perfect for young plants.

The LUMii Solar 315 is a complete fixture that power 315W ceramic discharge metal-halide (CDM) lamps to give plants the best possible spectrum of light.

Suitable for all CDM 315w lamps.

Please note that the bulbs / lamps are not included with the fixture and are available to purchase separately on our website.

Key Features

• Full Fixture – ballast & reflector
• State of the art ballast technology, including soft start
• Ideal as both supplementary and standalone lighting
• Extremely high PAR levels
• Highly efficient
• Short Circuit Protection

Advantages of CDM

Provide broadest spectrum

Ceramic metal halide lamps work by heating up a ceramic tube within the bulb. Ceramic can withstand much higher temperatures than other media typically used in lights. This higher temperature results in the bulb creating a plasma-like light source similar to the sun.  Since the light emitted from a CMH is akin to natural sunlight, its spectrum is closer to that of natural sunlight, so that plants exposed to CMH light are getting a wider range of wavelengths of usable light than other types of grow lights can produce.

Best CRI colour rendering index

CMH lights provide the highest measures of colour rendering index (CRI) as compared to other grow lights. Objects that are fully visible in natural, unobstructed light appear to the human eye with a CRI of 100. Artificial lighting does not reproduce the same light as the sun, but CMH bulbs come very close, with CRI ratings ranging between a low of 80 to a high of 96.

Provide UV Lighting

CMH bulbs, as a function of offering a fuller spectrum of light, provide significantly more ultraviolet light than many other types of grow lights. Plants thrive during their vegetative stages with this type of light and it aids in the development of stronger branches.

Colour Stability

Unlike various other types of grow lights, CMH bulbs provide a consistent quality and duration of light throughout their useful life. Many types of grow lights lose effectiveness over time that may not be evident to the human eye; CMH bulbs retain their wide spectrum.

More Efficient

This is subject depending on what is being compared and for the duration that the bulb is in use, but CMH bulbs are up to 20 per cent more efficient than other types of metal halide bulbs. The yield per watt of CMH bulbs is higher.

Longer Lasting

This is another subjective benefit, but CMH bulbs do last longer than halogen and incandescent lights. They have been confirmed to run as long as 24,000 hours (almost 3 years).

Produce Less Heat

Though they operate at higher temperatures, CMH bulbs emit less heat than other types of bulbs. This is important in smaller grow rooms, where a grow light may contribute to temperatures that are too high for efficient growth and yields. It also means that the bulb itself can be closer to the plant, reducing the chance of burning the leaves which is a possibility with some other types of grow lights.

No Electromagnetic Interference

The ceramic in CMH bulbs does not interfere with electronics such as cell phones or television signals the way that some other types of grow lights or electronic ballasts can. This is not only a convenience, but helps to avoid detection if the intent of a grow room is to keep a low profile.

The SOLAR 630 holds two 315 lamps. It offers two power switches, one for each lamp, allowing you to choose which lamps you want on or off.

Suitable for all CDM 315w lamps.

Please note that the bulbs / lamps are not included with the fixture and are available to purchase separately on our website.

Key Features

• Full Fixture – ballast & reflector
• State of the art ballast technology, including soft start
• Ideal as both supplementary and standalone lighting
• Extremely high PAR levels
• Highly efficient
• Short Circuit Protection

Advantages of CDM

Provide broadest spectrum

Ceramic metal halide lamps work by heating up a ceramic tube within the bulb. Ceramic can withstand much higher temperatures than other media typically used in lights. This higher temperature results in the bulb creating a plasma-like light source similar to the sun.  Since the light emitted from a CMH is akin to natural sunlight, its spectrum is closer to that of natural sunlight, so that plants exposed to CMH light are getting a wider range of wavelengths of usable light than other types of grow lights can produce.

Best CRI colour rendering index

CMH lights provide the highest measures of colour rendering index (CRI) as compared to other grow lights. Objects that are fully visible in natural, unobstructed light appear to the human eye with a CRI of 100. Artificial lighting does not reproduce the same light as the sun, but CMH bulbs come very close, with CRI ratings ranging between a low of 80 to a high of 96.

Provide UV Lighting

CMH bulbs, as a function of offering a fuller spectrum of light, provide significantly more ultraviolet light than many other types of grow lights. Plants thrive during their vegetative stages with this type of light and it aids in the development of stronger branches.

Colour Stability

Unlike various other types of grow lights, CMH bulbs provide a consistent quality and duration of light throughout their useful life. Many types of grow lights lose effectiveness over time that may not be evident to the human eye; CMH bulbs retain their wide spectrum.

More Efficient

This is subject depending on what is being compared and for the duration that the bulb is in use, but CMH bulbs are up to 20 per cent more efficient than other types of metal halide bulbs. The yield per watt of CMH bulbs is higher.

Longer Lasting

This is another subjective benefit, but CMH bulbs do last longer than halogen and incandescent lights. They have been confirmed to run as long as 24,000 hours (almost 3 years).

Produce Less Heat

Though they operate at higher temperatures, CMH bulbs emit less heat than other types of bulbs. This is important in smaller grow rooms, where a grow light may contribute to temperatures that are too high for efficient growth and yields. It also means that the bulb itself can be closer to the plant, reducing the chance of burning the leaves which is a possibility with some other types of grow lights.

No Electromagnetic Interference

The ceramic in CMH bulbs does not interfere with electronics such as cell phones or television signals the way that some other types of grow lights or electronic ballasts can. This is not only a convenience, but helps to avoid detection if the intent of a grow room is to keep a low profile.

135 watt output, suitable for garden plants and grow tents.

Amazing penetration and PPFD for the greenhouse, side-supplement lighting, and indoor taller plant applications.

With a thick aluminium passive heat sink and densely arranged chips, the SP series offers cultivators a high efficacy but low heat environment, helping maximize crop yields without noise or heat worries while spreading light deep enough for tall plants.

Waterproof LED board for the Mars SP 150 growing lamp, making it ideal within high humidity greenhouse growing environments, offering a 50% longer lifespan compared with other brand lights.

Newest SMD LED technology can get average yields at 1.8g/w (power draw), 2.8μmol/J increasing your yield by 50% compared with other 250w old led grow lights, with a uniform PAR value at average 516umol/m²/s at 45cm height.

Extremely energy efficient consuming only 135W with 322 LEDs! It saves up to 70% energy over other led plant lights.

All casing is heat sink and fanless design and will make your growing life easier and quiet! Fans can get noisy when used for a long time but this LED light board uses aluminium to make it cool down bringing you a quiet growing experience.

Specifications

LED Diode Brand:                     Epistar™ (HI-LED) High Intensity

Power Consumption:                240 V: 139 W ± 5%

Operating Requirements:         Input voltage: 85 V – 265 V

Coverage Area:                         60 cm x 60 cm

Hanging Distance:                    Seedling: 60 cm – 76 cm

                                                  Veg: 40 cm – 60 cm

                                                  Flower: 30 cm – 40 cm

Max yield:                                  2.5 g/watt

Incl Hanging Accessories:         Clasps

Product Dimensions:                 59.8 cm x 8 cm x 5 cm

Product Weight:                         2.525 kg

Operating Temperature:            -20°C – 40°C

Decibel Value:                             0

Plug Type:                                   SA

Warranty:                                    3 years

Peak PPFD Value:                        387 uMol/m2/s

Compare to HPS/MH/HID:         250 watt

LED Lens Degree:                        90°-120°

Spectrum:                                   650 – 665 nm, 3 000 – 3 200 K, 6 000 – 6 500 K

LED Quantity:                             322

Driver:                                        No Driver

Certificate:                                 UKCA,CE,RoHS, ETL

Lifespan:                                    50 000 hours

A great choice for most growers used in a grow tent, small room, cabinet & closet, and plant shelves.

The TS series have all the new light functions and technologies with affordable prices and different sizes to fit all kinds of grow scenarios and grow needs. The aluminium reflective hood design is a patented deign, to decrease light loss and increase light efficiency.

The newest SMD Led technology provides the highest Par/Lumen output. Average 2.5g yield per draw. Consuming only 105W with 342 Leds! It saves up to 30% energy over other led grow lights.

Perfect for 76x76cm Bloom stage and 90x90cm Veg stage. Over 90% light energy can be absorbed by plants, with higher intensity and more even coverage in a grow tent.

Close to natural light, great for all plants at the grow stage with rapid plant response from seed to flower and increased yields and crop quality.

The design will make your growing life easy and quiet, with the aluminium material quickly dispersing heat and reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants.

Specifications

LED Diode Brand:                      Epistar™ (HI-LED) High Intensity

Power Consumption:                 240 V: 148 W ± 5%

Operating Requirements:           Input voltage: AC100-277V

Coverage Area:                          90 cm x 90 cm

Hanging Distance:                     Veg: 90 cm – 90 cm

                                                  Flower: 76 cm – 76 cm

Max yield:                                  2.5 g/watt

Incl Hanging Accessories:         Clasps

Product Dimensions:                43.5 cm x 40 cm x 12.2 cm

Product Weight:                       1.800 kg

Operating Temperature:           -20°C – 40°C

Decibel Value:                             0

Plug Type:                                   SA

Warranty:                                    3 years

Peak PPFD Value:                        2.35 uMol/m2/s

Compare to HPS/MH/HID:         450 watt

LED Lens Degree:                        90°-120°

Spectrum:                                    650-665nm,3000-3200k,6000-6500k,IR(730nm)

LED Quantity:                              342

Driver:                                         Juson/Moso

Certificate:                                  UKCA,CE,RoHS, ETL

Lifespan:                                     50 000 hours

A great choice for most growers used in a grow tent, small room, cabinet & closet, and plant shelves.

The TS series have all the new light functions and technologies with affordable prices and different sizes to fit all kinds of grow scenarios and grow needs. The aluminium reflective hood design is a patented deign, to decrease light loss and increase light efficiency.

The newest SMD Led technology provides the highest Par/Lumen output, designed to replace a single-ended 150W HPS. Average 1.5g yield per draw. Consuming only 100W with 240 Leds! It saves up to 50% energy over other led grow lights.

Perfect for 45x45cm Bloom stage and 60x60cm Veg stage. Over 90% light energy can be absorbed by plants, with higher intensity and more even coverage in a grow tent.

660-665nm Red IR/3200-4200K/5200-6800K, close to natural light, great for all plants at the grow stage with rapid plant response from seed to flower and increased yields and crop quality.

The design will make your growing life easy and quiet, with the aluminium material quickly dispersing heat and reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants.

Specifications

LED Diode Brand:                      Epistar™ (HI-LED) High Intensity

Power Consumption:                 240 V: 99 W ± 5%

Operating Requirements:           Input voltage: 120 V or 240 V Amp: 0.413 A @ 240 V

Coverage Area:                          60 cm x 60 cm

Hanging Distance:                     Veg: 60 cm – 60 cm

                                                  Flower: 45 cm – 45 cm

Max yield:                                  1.5 g/watt

Incl Hanging Accessories:         Clasps

Product Dimensions:                35.6 cm x 31 cm x 3.6 cm

Product Weight:                       1.000 kg

Operating Temperature:           -20°C – 40°C

Decibel Value:                             0

Plug Type:                                   SA

Warranty:                                    3 years

Peak PPFD Value:                        405 uMol/m2/s

Compare to HPS/MH/HID:         150 watt

LED Lens Degree:                        90°-120°

Spectrum:                                    660 nm – 665 nm, 3 000 K – 3 200 K, 6 000 K – 6 500 K

LED Quantity:                             240

Driver:                                        No Driver

Certificate:                                 UKCA,CE,RoHS, ETL

Lifespan:                                    50 000 hours

A great choice for most growers used in a grow tent, small room, cabinet & closet, and plant shelves.

The TS series have all the new light functions and technologies with affordable prices and different sizes to fit all kinds of grow scenarios and grow needs. The aluminium reflective hood design is a patented deign, to decrease light loss and increase light efficiency.

The newest SMD Led technology provides the highest Par/Lumen output. Average 2.5g yield per draw. Consuming only 300W with 684 Leds! It saves up to 30% energy over other led grow lights.

Perfect for 90x90cm Bloom stage and 120x120cm Veg stage. Over 90% light energy can be absorbed by plants, with higher intensity and more even coverage in a grow tent.

Close to natural light, great for all plants at the grow stage with rapid plant response from seed to flower and increased yields and crop quality.

The design will make your growing life easy and quiet, with the aluminium material quickly dispersing heat and reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants.

Specifications

LED Diode Brand:                      Epistar™ (HI-LED) High Intensity

Power Consumption:                 240V: 300 W ± 5%

Operating Requirements:           Input voltage: AC100-277V

Coverage Area:                          120 cm x 120 cm

Hanging Distance:                     Veg: 120 cm – 120 cm

                                                  Flower: 90 cm – 90 cm

Max yield:                                  2.5 g/watt

Incl Hanging Accessories:         Clasps

Product Dimensions:                59.2 cm x 56.7 cm x 13 cm

Product Weight:                       3.700 kg

Operating Temperature:           -20°C – 40°C

Decibel Value:                             0

Plug Type:                                   SA

Warranty:                                    3 years

Peak PPFD Value:                        2.35 uMol/m2/s

Compare to HPS/MH/HID:         600 watt

LED Lens Degree:                        90°-120°

Spectrum:                                    650-665nm,3000-3200k,6000-6500k,IR(730nm)

LED Quantity:                              684

Driver:                                         Juson/Moso

Certificate:                                  UKCA,CE,RoHS, ETL

Lifespan:                                     50 000 hours