Environmental Control

Bluelab Probe Care Kit – pH and Conductivity

Everything you need to clean, calibrate and maintain your pH and conductivity probes.

Product Features / Benefits

Your Bluelab Probe Care Kit – pH and Conductivity contains:

• Probe care instructions 
• 20 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0, KCl and 2.77 EC standard solution 
• Three plastic cups 
• Bluelab pH Probe Cleaner 
• Bluelab Conductivity Probe Cleaner 
• Toothbrush for cleaning your pH probe 
• Chamois for cleaning your conductivity probe 
• There is currently no applicable warranty for this product.

Care, hydration and calibration – in one kit - Maintaining your Bluelab pH and conductivity probes

To ensure ongoing accuracy and longevity, we recommend that you maintain your Bluelab probes on a regular basis. While no calibration is required for conductivity and temperature, you will need to calibrate your pH probe. Your Probe Care Kit contains sachets of pH 4.0, pH 7.0 and KCl solutions for calibrating and storing your pH probes, as well as 2.77 EC standard solution for testing your conductivity probe after cleaning. This kit also includes probe cleaner and cleaning instruments. You’ll have everything you need to clean, calibrate and hydrate your probes – in one compact and affordable kit. 

Improve product longevity with regular calibration - How to calibrate your Bluelab pH products

If you want to improve your Bluelab pH product’s accuracy and longevity, you’ll need to get into the habit of regular cleaning and calibration.  Luckily, the easy-to-follow calibration process is the same for all Bluelab pH probes and pens. After cleaning your pH probe, you’ll need to calibrate it with pH calibration solutions at two reference standards - 4.0 and 7.0 pH. Once calibrated, you can start measuring pH again immediately. You’ll need to recalibrate whenever you clean your pH probe and when your meter alerts you that a calibration is needed.

Bluelab Probe Care Kit - pH

Everything you need to clean, calibrate and maintain your pH probes.

Product Features / Benefits

Your Bluelab Probe Care Kit – pH contains:

• Probe care instructions 
• 20 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0 and KCl solutions 
• Three plastic cups 
• Bluelab pH Probe Cleaner 
• Toothbrush for cleaning your pH probe 
• There is currently no applicable warranty for this product.

Care, hydration and calibration – in one kit - Maintaining your Bluelab pH probes

To ensure ongoing accuracy and longevity, we recommend that you clean, calibrate and hydrate your Bluelab pH probes on a regular basis.  Your Probe Care Kit contains sachets of pH 4.0, pH 7.0 and KCl solutions for calibrating and storing your pH probes. This kit also includes probe cleaner and a cleaning instrument. You’ll have everything you need to clean, calibrate and hydrate your probes – in one compact and affordable kit. 

Improve product longevity with regular calibration - How to calibrate your Bluelab pH products

If you want to improve your Bluelab pH product’s accuracy and longevity, you’ll need to get into the habit of regular cleaning and calibration.  Luckily, the easy-to-follow calibration process is the same for all Bluelab pH probes and pens. After cleaning your pH probe, you’ll need to calibrate it with pH calibration solutions at two reference standards - 4.0 and 7.0 pH. Once calibrated, you can start measuring pH again immediately. You’ll need to recalibrate whenever you clean your pH probe and when your meter alerts you that a calibration is needed.

Bluelab Probe Care Kit - Conductivity

Everything you need to clean and maintain your conductivity probes

Product Features / Benefits

Your Bluelab Probe Care Kit – Conductivity contains:

• Probe care instructions
• Two 20 ml single-use sachets of Bluelab 2.77 EC conductivity standard solution
• One plastic cup
• Bluelab Conductivity Probe Cleaner
• Chamois for cleaning your conductivity probe
• There is currently no applicable warranty for this product.

One simple kit for conductivity probe maintenance -  Caring for your Bluelab conductivity probes

All our EC products are factory calibrated so you don’t need to worry about calibrating your meters. This is just another way that Bluelab helps to make your life easier. Instead of calibrating, we recommend that you clean your conductivity probes on a regular basis. 

Your Probe Care Kit contains sachets of 2.77 EC standard solution for testing your conductivity probe after cleaning. This kit also includes probe cleaner and a cleaning instrument. 

With regular cleaning and ongoing maintenance, you’ll be maximising your conductivity probe’s longevity and accuracy.

Product Features / Benefits

Contains 250 ml

Compatible for use with Bluelab pH pens, Bluelab soil pH pens, Bluelab pH probes and Bluelab soil pH probes.

Improve longevity with KCl - How to care for your Bluelab pH products

Your pH probe is a sensitive glass instrument that ages through everyday use. If you want to improve your Bluelab pH product’s response time and longevity, make sure that you use Bluelab pH Probe KCl Storage Solution - 250 ml to store and hydrate your Bluelab pH probes and pens. Simply add KCl solution to the cap of your pH pen or probe for storage after use; make sure to top up the KCl every week. Once a month, you should hydrate your probe in KCl solution. You can find detailed instructions on the bottle. 

High-quality KCl solution - Effective and affordable storage and hydration

Bluelab pH Probe KCl Storage Solution - 250 ml is essential for use with all Bluelab pH products. All Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

pH maintenance and care - Your one-stop pH shop

For complete calibration, remember to stock up on Bluelab pH 4.0 and pH 7.0 Calibration Solutions, which are available in our store. Alternatively, our Bluelab Probe Care Kits contain everything you need to clean, store and calibrate your pH equipment. You can also expand your toolkit with our pH accessories and replacement parts, including replacement pH probes.

This product carries no warranty.

For sale is a 250ml bottle of Bluelab pH Probe KCL Storage Solution.

Product Features / Benefits

Contains 500 ml

Improve EC/PPM accuracy with regular cleaning.

Boost accuracy with regular cleaning - How to care for your Bluelab EC products

If you want to ensure the ongoing accuracy of your Bluelab conductivity products, we recommend that you clean and test them on a regular basis.

All our conductivity pens and meters are factory calibrated, so you won’t need to recalibrate them. Instead, you should clean your Bluelab EC probe and then use Bluelab 2.77 EC Conductivity Standard Solution - 500 ml to check that cleaning has been successful. 

You should aim to clean and test your EC product every 30 days. All our products come with step-by-step guidelines for cleaning and care.

High-quality conductivity standard solutions - Effective and affordable EC testing

Bluelab 2.77 EC Conductivity Standard Solution -is essential for use with all Bluelab conductivity products. All Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

Conductivity maintenance and care - Your one-stop EC shop

Bluelab Probe Care Kits are also available and contain everything you need to clean, maintain and test your conductivity equipment, such as EC probe cleaner, a chamois and more. You can also expand your toolkit with our conductivity replacement probes.

This product carries no warranty.

For sale is a 500ml bottle of Bluelab 500ML 2.77EC Conductivity Standard Solution.

Product Features / Benefits

Contains 500 ml

Boost your pH products’ longevity with regular cleaning and calibration.

Improve product longevity with regular calibration

How to calibrate your Bluelab pH products

If you want to improve your Bluelab pH product’s accuracy and longevity, you’ll need to get into the habit of regular cleaning and calibration. Luckily, the easy-to-follow calibration process is the same for all Bluelab pH meters and pens. 

After cleaning your pH probe, you’ll need to calibrate it with pH calibration solutions at two reference standards - 4.0 and 7.0 pH. Once calibrated, you can start measuring pH again immediately. You’ll need to recalibrate whenever you clean your pH probe and when your meter alerts you that a calibration is needed.

High-quality calibration solutions - Effective, affordable pH calibration

Bluelab pH 7.0 Calibration Solution - 500 ml is essential for use with all Bluelab pH products. All Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

To complete calibration, remember to stock up on Bluelab pH 4.0 Calibration Solution, which is available in our store. 

Alternatively, our Bluelab Probe Care Kits contain everything you need to clean, maintain and calibrate your pH equipment, such as calibration solutions, KCl storage solution and more. You can also expand your toolkit with our pH accessories and replacement parts, including replacement pH probes.

This product carries no warranty.

For sale is a 500ml bottle of Bluelab 500ML pH 7.0 Calibration Solution.

Product Features / Benefits

Contains 500 ml

Boost your pH products’ longevity with regular cleaning and calibration.

Improve product longevity with regular calibration

How to calibrate your Bluelab pH products

If you want to improve your Bluelab pH product’s accuracy and longevity, you’ll need to get into the habit of regular cleaning and calibration. Luckily, the easy-to-follow calibration process is the same for all Bluelab pH meters and pens. 

After cleaning your pH probe, you’ll need to calibrate it with pH calibration solutions at two reference standards - 4.0 and 7.0 pH. Once calibrated, you can start measuring pH again immediately. You’ll need to recalibrate whenever you clean your pH probe and when your meter alerts you that a calibration is needed.

High-quality calibration solutions - Effective, affordable pH calibration

Bluelab pH 4.0 Calibration Solution - 500 ml is essential for use with all Bluelab pH products. All Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

To complete calibration, remember to stock up on Bluelab pH 7.0 Calibration Solution, which is available in our store. 

Alternatively, our Bluelab Probe Care Kits contain everything you need to clean, maintain and calibrate your pH equipment, such as calibration solutions, KCl storage solution and more. You can also expand your toolkit with our pH accessories and replacement parts, including replacement pH probes.

This product carries no warranty.

For sale is a 500ml bottle of Bluelab 500ML pH 4.0 Calibration Solution.

A replacement probe for Bluelab Combo and pH Meters, and Guardian Monitors

The Bluelab pH Probe is a replacement pH probe (electrode) suitable for use with Bluelab products that test the pH value of a solution.

Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life.

The Bluelab pH Probe has a double junction reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free.

Replace only the pH probe, not the whole meter

Probe cable length: 2 meters / 6.5 feet

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) phthalate (DEHP), which is known to cause cancer and birth defects or other reproductive harm.

FEATURES

• Double-junction probe reduces reference contamination, extending longevity  
• Fully waterproof - not just water resistant  
• BNC connector allows use with all other compatible Bluelab products  
• 2-metre cable for measuring in hard-to-reach locations 
• Use the included storage cap with KCl to lengthen probe’s lifespan 
• Fast sensor response ensures quick and accurate measurements  
• Polycarbonate housing for long-lasting strength  
• Effective in solutions of 0.2 EC and above 
• Six-month guarantee for the Bluelab pH Probe (proof of purchase is required).

Bluelab pH Probe maintenance

Extend the life of your pH probe

You need to regularly clean and maintain your Bluelab pH Probe to ensure its ongoing accuracy and longevity.

Use Bluelab’s Probe Care Kit, which contains everything you need to clean and care for your pH probe. Every time you clean your probe, calibrate it using Bluelab Calibration Solutions. 

In addition, boost your probe’s lifespan by ensuring that its tip stays wet at all times. Use the included storage cap whenever you’re not using your probe and regularly top up the amount of KCl inside the cap. 

This probe is compatible with all Bluelab products with a corresponding BNC connector, such as the Combo Meter and Guardian Monitor.

The simplest and most effective reservoir monitor you could ever own!

The Bluelab Guardian Monitor provides 24 hour continuous reading for pH, conductivity (EC/ppm 700/TDS/CF) and temperature within a nutrient solution.

Optimizing these critical parameters through a plants’ growing phase helps ensure a successful crop.

Designed for indoor use, the Guardian Monitor can be mounted on a wall or hung on a support bar. Set up your reservoir, place the pH and conductivity probes in the solution, then adjust and glance!

Simply set high and low alarm states – if the solution moves away from the ideal range, the display flashes. A quick look at the monitor will let you know when your nutrient solution needs adjusting.

Specifications

Probe cable length: 2 meters / 6.5 feet

WARNING: This product can expose you to chemicals including Vinyl chloride.

FEATURES

• 24/7 continuous monitoring of pH, EC and temperature in reservoirs
• Large, backlit display for at-a-glance viewing
• High and low alarms to alert you when parameters are out of range
• Easy pH calibration function with on-screen instructions
• 2-metre cable lengths for best positioning and viewing
• Flexible mounting options for walls, posts and racks
• Easy-to-clean display built for clean environments
• There is a 2 year guarantee on this monitor; six-month guarantee on the Bluelab pH Probe (proof of purchase and original boxing are required).

While no calibration is required for conductivity and temperature, you will need to calibrate your monitor’s pH probe on a regular basis. Stock up on everything you need to clean, maintain and calibrate your probes by purchasing a Bluelab Probe Care Kit. 

Check out the YouTube video below which explains how simple it is to use the unit. 

Help Your Plants Grow – Fast, reliable and versatile: Combo Meter Plus means you will be able to measure more and build a better understanding of your complete growing system. The multimedia Leap pH probe can be used to measure nutrient solution and directly in the rootzone in a range of growing substrates including soil, rockwool, coco coir and peat.

Plant Health in the Palm of Your Hand – Manage, control & monitor your plant health & performance. The Bluelab Combo Meter Plus device will fit in the palm of your hand which will allow you to spot check wherever you are! The backlit, easy-to-read display and 2m/6’ cables give you the ability to measure in places previously inaccessible. Get answers at your fingertips.

Simple & Easy to use – This device is all you need for simple, reliable nutrient solution and root zone management. Featuring a detachable Leap pH probe with simple, 2-point calibration makes for ease maintenance. Get up and running fast. Quick and intuitive to use with simple one button presses to change between measurements. The Bluelab Combo Meter Plus a simple quick start guide to help you get started fast.

3 IN 1 Nutrient Solution Measurement-  Measures three key parameters to ensure your nutrient solution is at the right level and available to your plants. This 3 in 1 device will measure your pH levels, nutrient levels & temperatures directly in your solution, to optimise nutrient availability through the growing system.

Root Zone pH Measurement – The versatile Leap pH Probe allows for pH measurement directly in the root zone area as well as in solution.

Features

• • Measures pH, conductivity / nutrient (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)
  • Leap pH Probe, toughened spear tip for direct root zone, multimedia friendly, for measurements across a range of environments
  • Lightweight and portable
  • Large easy to read display
  • Simple push button pH calibration
  • Successful pH calibration indicator
  • No calibration required for conductivity and temperature
  • Replaceable double junction pH probe included
  • Over range and under range indicators
  • Low battery indicator
  • 2 x AAA alkaline batteries included
  • Auto off function
  • Guarantee: 5 year limited guarantee for Bluelab Combo Meter Plus (excluding probe which is 6 months) (proof of purchase is required)
    

It is important to calibrate the meter correctly. Check out the YouTube video below which explains how simple this is.

The ultimate handy solution for measuring conductivity (EC or ppm) and temperature!

The Bluelab Conductivity Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. To feed plants well, we need to know what we’re feeding them. Start with a quality nutrient.

Measuring the conductivity every day is the best way to avoid over-diluting or over-concentrating your nutrient solution. Completely change the reservoir solution every 7 days. Top up the nutrient level between changes – so your plants always have the right amount of food.

The Bluelab Conductivity Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 – 22˚C or 65 – 72˚F is recommended.

To make sure the plants can get at the food, you need to measure the pH of the solution. Check out our handy Bluelab pH Pen so you have every tool required to manage your nutrient solution.

Features

• • Measures conductivity and temperature
  • Selectable units for conductivity and temperature
  • Backlit LCD display
  • Calibration optional
  • Successful EC or ppm calibration indicator
  • Hold reading function
  • Low battery indicator
  • Fully waterproof
  • Auto off function
  • Automatic temperature compensation
  • 1 x AAA alkaline battery included
  • Guarantee: 1 year limited guarantee for Bluelab Conductivity Pen (proof of purchase is required)
    

It is important to check the EC of the conductivity pen using the Bluelab 2.77EC Conductivity Standard Solution (we do stock this for your convenience) at regular intervals and to clean it so that it is operating optimally. Check out the YouTube video below which explains how simple this is.

The World’s favourite conductivity meter. Simply brilliant, brilliantly simple!

It is essential when growing with a hydroponic solution to KNOW what the strength of the solution is before feeding your plants AND while they are growing. If the conductivity reading is too low, your plants may not be getting enough nutrients. If the conductivity reading is too high, plants can dehydrate.

Understanding the conductivity of the nutrient solution takes the guesswork out of feeding plants. It will also save you money! Using the Bluelab Truncheon® Nutrient Meter is the fastest and easiest way to measure the conductivity!

To take a reading of your solution – simply place the probe head into the solution and the reading is indicated by the flashing lights. Calibration of the Truncheon® Nutrient Meter is not required.

Features

• • EC (0.2 – 3.6), CF (2 – 36) and ppm scales (TDS and 700 scale)
  • Fully waterproof
  • No calibration required
  • Auto sense on and off
  • No external switches or adjustable buttons
  • Battery life minimum 1 year (or shelf life of battery)
  • Meter Length 40.7cm
  • Guarantee: 5 year guarantee for Bluelab Truncheon® Nutrient Meter (proof of purchase is required)
    

It is important to check the EC of the truncheon using the Bluelab 2.77EC Conductivity Standard Solution (we do stock this for your convenience) at regular intervals and to clean it so that it is operating optimally. Check out the YouTube video below which explains how simple this is.

The ultimate handy solution for measuring pH and temperature!

Plants get their nutrient from minerals but they can only get all the right minerals they need if certain conditions are right. Think of nutrients like a lock. pH is the key. A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH.

The Bluelab pH Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 – 22˚C or 65 – 72˚F is recommended.

The hand held pH pen provides a compact quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients.

Teamed with our Bluelab ppm or EC Pen, you have a handy, convenient and accurate system for ensuring optimum plant growth and health.

Features

• Measures pH and temperature
• Selectable units for temperature
• Backlit LCD display
• Double junction probe (not replaceable)
• Successful pH calibration indicator
• Hold reading function
• Low battery indicator
• Fully waterproof
• Auto off function
• Automatic temperature compensation
• 1 x AAA alkaline battery included
• Guarantee: 1 year guarantee for Bluelab pH Pen, 6 month guarantee for Bluelab pH Probe (proof of purchase is required)

It is vital to use pH Storage Solution with this meter, to extend the pH probe’s lifespan.