Hydroponic Systems

The Blumat Classic Standard Sensor keeps indoor plants watered automatically when they need it! A simpler version of the Blumat Tropf System, where the water is drawn from any container through a thin tube and released directly through the clay cone “carrot” into the plant’s root zone.

Blumat Classic is the tried and tested solution for the reliable watering of all kinds of indoor plants. Simple and totally safe to use, at the weekend, on holiday or all year round. Also suitable for the watering of balcony plants when you’re on holiday in the XL version.

You can regulate the amount of water that each plant will receive be adjusting the height of the water container relative to the plant pot:

The Blumat Classic Standard Sensor will take the hassles out of keeping your potted indoor plant hydrated and healthy ! Everything you need to get started is included in the pack!

Pack Contains 3 x Blumat Classic "Carrots".

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for the Blumat Classic System can be found at this link.

Blumat Classic Setup

The Blumat Easy Universal Watering Adaptor is the simplest and easiest watering solution in the Blumat Automatic Watering Range!

The Blumat Easy XL dispenses 0.3 litres of water per day and is therefore suitable for large plants and thirsty vegetables such as tomatoes or cucumbers.

Blumat Easy is a hassle-free, “plant-sitting” service that comes in handy when you want to take a short holiday. The plants are continuously and evenly supplied with water during your absence. Blumat Easy is quick and easy to use with any standard plastic bottle, like an empty drink bottle.

The adapter fits almost any standard plastic bottle from 0.5 – 2 litres.

The pack contains 2 x Blumat Easy XL "Carrots". 

Blumat Easy Setup

Fill the bottle with water.
Attach the adapter to bottle.
Pierce a small hole in the bottle.
Place the bottle with the adapter upside down in the potting soil.
The porous clay cone now releases water slowly and evenly into the soil.
You can add more than one Blumat Easy Universal Watering Adaptor to larger, thirstier plants.
Water delivery: 1 x Blumat Easy XL : 0.3 litres / day.

The Blumat Easy Universal Watering Adaptor is the simplest and easiest watering solution in the Blumat Automatic Watering Range!

Blumat Easy is a hassle-free, “plant-sitting” service that comes in handy when you want to take a short holiday. The plants are continuously and evenly supplied with water during your absence. Blumat Easy is quick and easy to use with any standard plastic bottle, like an empty drink bottle.

The adapter fits almost any standard plastic bottle from 0.5 – 2 litres.

Blumat Easy Setup

Fill the bottle with water.
Attach the adapter to bottle.
Pierce a small hole in the bottle.
Place the bottle with the adapter upside down in the potting soil.
The porous clay cone now releases water slowly and evenly into the soil.
You can add more than one Blumat Easy Universal Watering Adaptor to larger, thirstier plants.
Water delivery: 1 x Blumat Easy: 0.2 litres / day.

The Blumat Classic Standard Sensor keeps indoor plants watered automatically when they need it! A simpler version of the Blumat Tropf System, where the water is drawn from any container through a thin tube and released directly through the clay cone “carrot” into the plant’s root zone.

Blumat Classic is the tried and tested solution for the reliable watering of all kinds of indoor plants. Simple and totally safe to use, at the weekend, on holiday or all year round. Also suitable for the watering of balcony plants when you’re on holiday in the XL version.

You can regulate the amount of water that each plant will receive be adjusting the height of the water container relative to the plant pot:

The Blumat Classic Standard Sensor will take the hassles out of keeping your potted indoor plant hydrated and healthy ! Everything you need to get started is included in the pack!

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for the Blumat Classic System can be found at this link.

Blumat Classic Setup

The Blumat Tropf Maxi Sensor is a longer (22.5cm) (9″ end to end) “carrot” sensor, to adequately water plants in deeper pots of 30 cm or more. The sensor includes a short piece of 3mm Blumat drip tube and a 8-8-3mm T-Piece that will fit into the 8mm Blumat water supply line. It works in the same way as the standard (12.5cm) 5″Blumat Tropf sensor, but will remain open until a deeper watering has occurred,

Tropf-Blumat is an automatic watering system. This water-saving drip irrigation  system works without electricity and without an app and is controlled by  the porous clay cones. You don’t even need a permanent water supply to  water plants automatically. Indoors, the best watering options are the Blumat Classic or the Blumat Easy bottle adapter.

Blumat watering systems are ideal for indoor plants, balcony plants and potted plants. The plant  watering system is a reliable, efficient and economical way of watering  flowering plants and vegetables on the balcony and patio, in raised  beds and greenhouses. Blumat is ideal for watering plants when you are on holiday and works all year round.

Tropf-Blumat is an automatic watering system for plants all around the house. From flowering plants to your own vegetables, Tropf-Blumat is a needs-based system - watering only occurs when necessary.

Needs-based & economical With Tropf-Blumat, every single plant is individually watered. That’s good news for the plants and also reduces water consumption. More flowers, more fruits, you will notice the difference.

Convenient Tropf-Blumat reliably takes care of the daily watering for you. You can also go on holiday with an easy mind at any time as Tropf-Blumat works all year round.

Advantages

Simple & flexible Tropf-Blumat consists of just a few components and can be installed without any tools. You can change your system at any time and extend it to up to 500 watering points.

Smart without electricity Tropf-Blumat works completely without electricity or water computer.

No mains connection

No changing of batteries

No complex programming

The clay cone thinks for you.

Natural watering

The water is released slowly and in doses. Consequently, plants always receive tempered water and healthy and lush growth is the result.

Adding a Blumat Tropf Maxi Sensor to your system will take the hassle out of keeping your deep rooted potted plants hydrated and healthy.

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for Tropf-Blumat systems can be downloaded here.

Some great YouTube videos :

 Tropf Blumat Installation

About the Tropf Blumat System

The Blumat Tropf Standard Sensor 2 Pack includes two 12.5cm (5″) (end to end) “carrot” sensors, and is used to extend your existing Blumat Automatic Watering System.

Tropf-Blumat is an automatic watering system. This water-saving drip irrigation  system works without electricity and without an app and is controlled by  the porous clay cones. You don’t even need a permanent water supply to  water plants automatically. Indoors, the best watering options are the Blumat Classic or the Blumat Easy bottle adapter.

Blumat watering systems are ideal for indoor plants, balcony plants and potted plants. The plant  watering system is a reliable, efficient and economical way of watering  flowering plants and vegetables on the balcony and patio, in raised  beds and greenhouses. Blumat is ideal for watering plants when you are on holiday and works all year round.

Tropf-Blumat is an automatic watering system for plants all around the house. From flowering plants to your own vegetables, Tropf-Blumat is a needs-based system - watering only occurs when necessary.

Needs-based & economical With Tropf-Blumat, every single plant is individually watered. That’s good news for the plants and also reduces water consumption. More flowers, more fruits, you will notice the difference.

Convenient Tropf-Blumat reliably takes care of the daily watering for you. You can also go on holiday with an easy mind at any time as Tropf-Blumat works all year round.

Advantages

Simple & flexible Tropf-Blumat consists of just a few components and can be installed without any tools. You can change your system at any time and extend it to up to 500 watering points.

Smart without electricity Tropf-Blumat works completely without electricity or water computer.

No mains connection

No changing of batteries

No complex programming

The clay cone thinks for you.

Natural watering

The water is released slowly and in doses. Consequently, plants always receive tempered water and healthy and lush growth is the result.

Use your Blumat Tropf Standard Sensor 2 Pack when you need to water additional pots and to extend the range of your existing Blumat Automatic Watering System. 

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for Tropf-Blumat systems can be downloaded here.

Some great YouTube videos :

 Tropf Blumat Installation

About the Tropf Blumat System

Tropf-Blumat is an automatic watering system. This water-saving drip irrigation  system works without electricity and without an app and is controlled by  the porous clay cones. You don’t even need a permanent water supply to  water plants automatically. Indoors, the best watering options are the Blumat Classic or the Blumat Easy bottle adapter.

Blumat watering systems are ideal for indoor plants, balcony plants and potted plants. The plant  watering system is a reliable, efficient and economical way of watering  flowering plants and vegetables on the balcony and patio, in raised  beds and greenhouses. Blumat is ideal for watering plants when you are on holiday and works all year round.

Tropf-Blumat is an automatic watering system for plants all around the house. From flowering plants to your own vegetables, Tropf-Blumat is a needs-based system - watering only occurs when necessary.

Needs-based & economical With Tropf-Blumat, every single plant is individually watered. That’s good news for the plants and also reduces water consumption. More flowers, more fruits, you will notice the difference.

Convenient Tropf-Blumat reliably takes care of the daily watering for you. You can also go on holiday with an easy mind at any time as Tropf-Blumat works all year round.

Advantages

Simple & flexible Tropf-Blumat consists of just a few components and can be installed without any tools. You can change your system at any time and extend it to up to 500 watering points.

Smart without electricity Tropf-Blumat works completely without electricity or water computer.

No mains connection

No changing of batteries

No complex programming

The clay cone thinks for you.

Natural watering

The water is released slowly and in doses. Consequently, plants always receive tempered water and healthy and lush growth is the result.

The Blumat-Tropf Automatic Watering System 3 Meter Set is a ready-to go self-watering kit that allows you to water:

• 12 x 25 cm diameter pots, OR
• 6 x 40 cm diameter pots, OR
• 4 x 50 cm diameter pots, OR
• 3 x narrow 1 meter flower boxes

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for Tropf-Blumat systems can be downloaded here.

Some great YouTube videos :

 Tropf Blumat Installation

About the Tropf Blumat System

The Blumat Easy Universal Watering Adaptor is the simplest and easiest watering solution in the Blumat Automatic Watering Range!

Blumat Easy is a hassle-free, “plant-sitting” service that comes in handy when you want to take a short holiday. The plants are continuously and evenly supplied with water during your absence. Blumat Easy is quick and easy to use with any standard plastic bottle, like an empty drink bottle.

The adapter fits almost any standard plastic bottle from 0.5 – 2 litres.

The pack contains 3 x Blumat Easy "Carrots". 

Blumat Easy Setup

Fill the bottle with water.
Attach the adapter to bottle.
Pierce a small hole in the bottle.
Place the bottle with the adapter upside down in the potting soil.
The porous clay cone now releases water slowly and evenly into the soil.
You can add more than one Blumat Easy Universal Watering Adaptor to larger, thirstier plants.
Water delivery: 1 x Blumat Easy: 0.2 litres / day.

The Blumat Classic XL Sensor keeps indoor plants watered automatically when they need it! A simpler version of the Blumat Tropf System, where the water is drawn from any container through a thin tube and released directly through the clay cone “carrot” into the plant’s root zone.

Blumat Classic is the tried and tested solution for the reliable watering of all kinds of indoor plants. Simple and totally safe to use, at the weekend, on holiday or all year round. Also suitable for the watering of balcony plants when you’re on holiday in the XL version. The Classic XL Sensors allow more watering in a day than the Classic Standard Sensors.

You can regulate the amount of water that each plant will receive be adjusting the height of the water container relative to the plant pot:

The Blumat Classic XL Sensor will take the hassles out of keeping your potted indoor plant hydrated and healthy ! Everything you need to get started is included in the pack!

Pack Contains 2 x Blumat Classic XL "Carrots".

It is not recommended to use the system to feed your plants a nutrient solution as it is likely that there will be a build-up of salt / nutrient calcification. We recommend that you use the system for hydrating your plants and that you top feed the nutrients your plant needs.

This system does not include a water tank.

Full installation instructions for the Blumat Classic System can be found at this link.

Blumat Classic Setup