Hydroponic Systems

80 x 80 x 160 cm

Strong and resistant fabric Nylon 420D

Patented, strong and stable structure

Premium mylar reflectivity 97%

Certified mylar plants friendly

Resistant and lightproof zippers

Doubled and soft fabric sockets

LightHouse LITE is the budget tent, for the grower who wants no frills. It offers a simple, lightweight frame that incorporates nylon corners, but still has multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.
Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.

LightHouse LITE Core Specification:
• Tri Layer 210 Denier material with the special LightHouse ULTRALUX reflective liner
• Quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging
• Main frame made from 16 mm steel poles with welded metal corners
• One piece waterproof insert tray
• All outlets for air and cables are double lined and light-tight with Pull toggles on each lining
• 2 x filter straps
• Door clips on all doors for fastening when open

Product Specification:
Extraction is through the roof with a 250 mm (10”) sock
2 x inline 250 mm (10”) socks for use with air-cooled lighting
2 x low level passive air vents with fine (anti-mite) mesh.
Also includes light proof covers for when not in use.
1 x intake vent with 250 mm (10") Sock

Recommendations:
Two lamp set up - 2 x 600 W HID
Recommended minimum extraction fan size - 150 mm (6")

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF

LightHouse LITE is the budget tent, for the grower who wants no frills. It offers a simple, lightweight frame that incorporates nylon corners, but still has multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.
Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.

LightHouse LITE Core Specification:
• Tri Layer 210 Denier material with the special LightHouse ULTRALUX reflective liner
• Quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging
• Main frame made from 16 mm steel poles with welded metal corners
• One piece waterproof insert tray
• All outlets for air and cables are double lined and light-tight with Pull toggles on each lining
• 2 x filter straps
• Door clips on all doors for fastening when open

Product Specification:
Extraction is through the roof with a 250 mm (10”) sock
2 x inline 250 mm (10”) socks for use with air-cooled lighting
2 x low level passive air vents with fine (anti-mite) mesh.
Also includes light-proof covers for when not in use.
1 x intake vent with 250 mm (10”) Sock

Recommendations:
Fits most growing systems
For single lamp set up - up to 1000 W
Recommended minimum extraction fan size - 125 mm (5”)

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF

LightHouse LITE is the budget tent, for the grower who wants no frills. It offers a simple, lightweight frame that incorporates nylon corners, but still has multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.
Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.

LightHouse LITE Core Specification:
•Tri Layer 210 Denier material with the special LightHouse ULTRALUX reflective liner
•Quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging
•Main frame made from 16 mm steel poles with welded metal corners
•One piece waterproof insert tray
•All outlets for air and cables are double lined and light-tight with Pull toggles on each lining
•2 x filter straps
•Door clips on all doors for fastening when open

Product Specification:
Extraction is through the roof with a 250 mm (10”) sock
2 x inline 250 mm (10”) socks for use with air-cooled lighting
2 x low level passive air vents with fine (anti-mite) mesh.
Also includes light proof covers for when not in use.
1 x intake vent with 250 mm (10") Sock

Recommendations:
Fits most growing systems
For single lamp set up - 600 W HID
Recommended minimum extraction fan size - 125 mm (5")

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF

LightHouse LITE is the budget tent, for the grower who wants no frills. It offers a simple, lightweight frame that incorporates nylon corners, but still has multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.
Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.


LightHouse LITE Core Specification:
• Tri Layer 210 Denier material with the special LightHouse ULTRALUX reflective liner
• Quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging
• Main frame made from 16 mm steel poles with welded metal corners
• One piece waterproof insert tray
• All outlets for air and cables are double lined and light-tight with Pull toggles on each lining
• 2 x filter straps
• Door clips on all doors for fastening when open


Product Specification:
Extraction is through the roof with a 250 mm (10”) sock
2 x inline 250 mm (10”) socks for use with air-cooled lighting
2 x low level passive air vents with fine (anti-mite) mesh.
Also includes light proof covers for when not in use.
1 x intake vent with 250 mm (10") Sock


Recommendations:
Ideal for use as a drying storage environment when used with the LightHouse DryNet
For single lamp set up - 400 W HID
Recommended minimum extraction fan size - 100 mm (4")

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF

Small tent for propagation
Size: 700 mm x 500 mm x 900 mm (when on long edge as propagation tent).
The unit can be used as a propagation tent or turned upright to be used as a small grow tent in its own right.
Extraction is via two 100 mm (4”) socks and a passive air vent fitted with fine (anti-mite) mesh.
Comes with an integral waterproof tray.
Tri-Layer 210 Denier material with special LightHouse UltraLux reflective liner.
Quality Tivax double lined zips that are easy to use and offers good light proofing with no snagging.
Main frame made from 16 mm steel pole with nylon corners

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF

LightHouse LITE is the budget tent, for the grower who wants no frills. It offers a simple, lightweight frame that incorporates nylon corners, but still has multiple choices of ducting and cable glands all with double seals.
The attention to detail in the design of the LightHouse range extends through both the premium LightHouse MAX and the budget LightHouse LITE.
Both benefit from a new reflective material called ULTRALUX, which offers up to 30% higher reflectivity over traditional products, while the Tivax zips fitted to all doors have proven ability to offer a quality seal when closed.

LightHouse LITE Core Specification:
• Tri Layer 210 Denier material with the special LightHouse ULTRALUX reflective liner
• Quality Tivax double lined zips that are easy to use and offer good light proofing with no snagging
• Main frame made from 16 mm steel poles with welded metal corners
• One piece waterproof insert tray
• All outlets for air and cables are double lined and light-tight with Pull toggles on each lining
• 2 x filter straps
• Door clips on all doors for fastening when open

Product Specification:
Extraction is through the roof with a 200 mm (8”) sock
2 x inline 200 mm (8”) socks for use with air-cooled lighting
2 x low level passive air vents with fine (anti-mite) mesh.
Also includes light proof covers for when not in use.
1 x intake vent with 200 mm (8") Sock

Recommendations:
For single lamp set up - 250 W HID or high powered CFL
Recommended minimum extraction fan size - 100 mm (4")

Ideal for use with the PLANT!T Gemini or Aeros Systems

For the full Catalogue of Lighthouse Range of Tents that we stock please download this PDF